Filter

Subject area

Level

Delivery method

Location

Filter
Course

Business Improvement

Supporting End Point Assessment (EPA) in the Workplace

Method: Blended Learning Level: Introduction Cost: £400 +VAT Duration: 4 Days

View course overview

In order for an Apprentice to successfully complete their End Point Assessment, they are reliant on having been given training and exposure to the relevant types of work, which meets the EPA requirements. For those who work closely with Apprentices through managing, supervising or mentoring, this course will provide you with a valuable insight into how to interpret the assessment criteria and match it with the types of work your company carries out. This then allows you to pre-plan and guide the Apprentice into the full range of work required, for a successful EPA.

Engineering Essentials

Electrical Fault Finding and Preventative Maintenance

Method: Face to Face Level: Introduction Cost: £1800 +VAT Duration: 4 Days

View course overview

This course goes beyond reactive maintenance, empowering you to prevent breakdowns from happening in the first place. Learn the art of preventative maintenance, where you'll analyse system history, identify potential issues, and implement proactive measures to eliminate repeat problems.

Engineering Essentials

Electrical Installation in an Industrial Environment

Method: Face to Face Level: Introduction Cost: £1800 +VAT Duration: 4 Days

View course overview

This comprehensive course is designed to equip individuals with zero or minimal electrical experience with the expertise to design, install, and test typical distribution circuits in industrial settings.

Engineering Essentials

Introduction to Hand Fitting

Method: Face to Face Level: Introduction Cost: £1800 +VAT Duration: 4 Days

View course overview

Delve into essential safety guidelines and fundamental skills necessary for using a variety of hand tools. By the end of the course, delegates will be able to use hand fitting equipment safely and effectively to produce a range of work.

Engineering Essentials

Introduction to Turning

Method: Face to Face Level: Introduction Cost: £1800 +VAT Duration: 4 Days

View course overview

Discover the essential safety requirements and fundamental skills needed for operating centre lathes with our comprehensive course.

Engineering Essentials

Introduction to Milling

Method: Face to Face Level: Introduction Cost: £1800 +VAT Duration: 4 Days

View course overview

This course explores the foundational principles behind manual milling. It equips learners with a comprehensive understanding of the safety protocols associated manual production machines within the manufacturing industry.

Business Improvement

Sustainability in Projects

Method: Online learning Level: Introduction Cost: £25 +VAT Duration: 1.5 Hour

View course overview

The aim of the course is to increase awareness of sustainability in projects and help your business move towards a sustainable culture by understanding the principles and the wider implications of project decisions.

Sustainability in Projects

Add to cart

Engineering Essentials

Panel Wiring and Electrical Control

Method: Face to Face Level: Introduction Cost: £1800 +VAT Duration: 4 Day

View course overview

This four-day intensive practical course has been designed to give people with little or no experience of Industrial Electrical systems, a detailed overview of how electrical components work together to control industrial electrical systems to give learners the confidence they need in the workplace.

Automation & Robotics

Automation Beginner Bootcamp

Method: Face to Face Level: Introduction Cost: £2250 +VAT Duration: 5 Day

View course overview

This course is designed to equip engineers with a comprehensive understanding of automated systems, enabling them to navigate and optimise processes effectively. In just 5 days, this course will provide delegates with hands-on skills in robotics, PLC operation, electrical and mechanical maintenance, and mastering pneumatic components.

Engineering Essentials

Introduction to Electro-Pneumatics

Method: Face to Face Level: Introduction Cost: £1350 +VAT Duration: 3 Days

View course overview

This intensive course gives delegates with little or no experience in pneumatics a detailed overview of the subject. The course enables delegates to interpret pneumatic schematics, design, install and test pneumatic control panels.

Engineering Essentials

Mechanical Maintenance

Method: Face to Face Level: Introduction Cost: £1800 +VAT Duration: 4 Days

View course overview

This four-day practical course has been designed to give delegates a good grounding in mechanical maintenance. The course covers fundamental safety, drive systems, disassembly & assembly techniques, Preventative maintenance, fault finding and interoperating technical information such as drawings and component specifications. It will provide learners with the knowledge and practical skills they need to work safely and competently on a range of mechanical equipment.

Engineering Essentials

Design to Manufacture Graduate Development Programme

Method: Blended Learning Level: Introduction Cost: £2000 +VAT Duration: 5 Days

View course overview

In addition to MTC Training providing learning solutions in adoption of emerging technologies, we also provide Graduate Development Programmes designed to fast-track a graduate’s experience in manufacturing.

Automation & Robotics - Engineering Essentials

Introduction to PLC Programming

Method: Face to Face Level: Introduction Cost: £1350 +VAT Duration: 3 Days

View course overview

This three-day course has been designed to give those with little or no experience of PLC systems, a deep dive into one of the key components of many automated systems. The course starts with basic principles and builds up to a final project where you will design, build, and program an industrial conveyor control system. This practical course gives learners the confidence they need in the workplace when working with PLC systems.

Automation & Robotics

Developing the Business Case for Automation Adoption

Method: Online learning Level: Intermediate Cost: £100 +VAT Duration: 3 Hour

View course overview

Upon completion of this course, delegates will be able to develop a business case for using automation in a given scenario.

Developing the Business Case for Automation Adoption

Add to cart

Space

Satellite Manufacture, Assembly, Integration and Verification

Method: Blended Learning Level: Introduction Cost: £450 +VAT Duration: 1 Day

View course overview

This course aims to provide you with an introduction to topics of value to the Space industry in particular Satellite Manufacture, Assembly, Integration and Verification which will enable you to upskill and obtain cross-sector skills.

Space

Environment Testing for Space

Method: Blended Learning Level: Introduction Cost: £450 +VAT Duration: 1 Day

View course overview

This course aims to provide you with an introduction to topics of value to the Space industry in particular Environment Testing for Space which will enable you to upskill and obtain cross-sector skills.

Space

Space Environment and its Effects

Method: Blended Learning Level: Introduction Cost: £450 +VAT Duration: 1 Day

View course overview

This course aims to provide you with an introduction to topics of value to the Space industry in particular Space Environment and its Effects which will enable you to upskill and obtain cross-sector skills.

Space

Spacecraft Platform Systems and Design

Method: Blended Learning Level: Introduction Cost: £450 +VAT Duration: 1 Day

View course overview

This course aims to provide you with an introduction to topics of value to the Space industry in particular Spacecraft Platform Systems and Design which will enable you to upskill and obtain cross-sector skills.

Space

Cleanrooms for Space

Method: Blended Learning Level: Introduction Cost: £450 +VAT Duration: 1 Day

View course overview

This course aims to provide you with an introduction to topics of value to the Space industry in particular Cleanrooms for space which will enable you to upskill and obtain cross-sector skills.

Business Improvement

Systems Thinking: Strategic Options for Development & Analysis

Method: Face to Face Level: Introduction Cost: £1800 +VAT Duration: 4 Day

View course overview

Upon completion of this course, you will be able to effectively apply Systems Thinking principles to a given situation.

Additive Manufacturing

Reverse Engineering Parts for AM – Online & Live

Method: Online & Live Level: Intermediate Cost: £300 +VAT Duration: 1 Day

View course overview

This course will enable you to design an appropriate process to reverse engineer a selected part so that it can be made using AM.

Additive Manufacturing

Inspection and Testing of AM parts – Online & Live

Method: Online & Live Level: Introduction Cost: £300 +VAT Duration: 1 Day

View course overview

This course will enable you to identify the benefits and features associated with the inspection and testing techniques used to certify and validate AM parts.

Digitalisation

Digitalising Your Manufacturing Business Certificate

Level: Introduction Cost: £125 +VAT Duration: 4.5 Hours

View course overview

Many manufacturing SMEs recognise that digitalisation could transform their business for tomorrow – but can’t move past the challenges of today. This interactive three-part certificate course delivers relevant, practical, sector-specific insights to fuel your first steps towards data-driven operations. Throughout the course series, our experts demystify digitalisation and share the significant benefits it offers to your business’s processes and productivity levels. Start your journey now.

Digitalisation

Exploring the Benefits of Digitalisation

Method: Online learning Level: Introduction Cost: £25 +VAT Duration: 1.5 Hours

View course overview

This first course in our online certificate delivers practical skills and proven industry insights to help you begin to shape your digitalisation pathway. Guided by skilled Subject Matter Experts, you’ll discover the benefits that data and digitalisation can bring to your manufacturing processes and gain the confidence to start planning how to identify and engage the right expertise, resources, and support to bring those benefits to life.

Step 1: Exploring the Benefits of Digitalisation

Add to cart

Digitalisation

Realising the Value of Data

Method: Online learning Level: Introduction Cost: £75 +VAT Duration: 1.5 Hours

View course overview

When it comes to digitalisation, everyone’s needs are different – and the sheer volume and variety of available solutions can feel overwhelming. This second course in our three-part online certificate cuts through the noise. You’ll discover the right data and digitalisation technologies and enablers to tackle the specific organisational goals you identified in Step 1.

Step 2: Realising the Value of Data

Add to cart

Digitalisation

Developing your Digitalisation Action Plan

Method: Online learning Level: Introduction Cost: £75 +VAT Duration: 1.5 Hours

View course overview

Whatever your starting point, this third course in our online certificate series guides you through a practical planning process that will help you to begin your journey. Supported by experienced subject matter experts, you’ll create personalised plan of action that will help to drive meaningful improvements – through both quick wins and longer-term projects – now and in the future. You’ll apply a logical, systematic methodology to the most relevant areas of your organisation, fuelling performance benefits linked directly to your strategic goals and key performance indicators (KPIs).

Step 3: Developing Your Digitalisation Action Plan

Add to cart

Partnerships

Introduction to Lean – IMR

Method: Online learning Level: Introduction Cost: €567 +VAT Duration: 7 Hours

View course overview

This course is an introduction to the methods of Lean and Six Sigma and the contribution they make to improving a process. These approaches to process improvement reduce waste, boost productivity, and increase overall profitability. Lean Six Sigma can be successfully implemented in organizations of every size and in all sectors of industry.

Automation & Robotics - Partnerships

Innovation Through Robotics – IMR

Method: Online learning Level: Introduction Cost: €2000 +VAT Duration: 5 Days

View course overview

On successful completion of this CPD accredited, signature course, you will be able to identify and evaluate deployment opportunities for robotics and automation in your organization and identify where the greatest business impact can be achieved. Throughout this course you will be supported by IMRs expert instructors in putting together an innovation approach, specific to your business.

Automation & Robotics - Partnerships

Introduction to Industrial Internet of Things – IMR

Method: Online learning Level: Introduction Cost: €567 +VAT Duration: 1 Day

View course overview

In this course, Mike Hibbett - a veteran of IIoT hardware design provides a broad, un-biased introductory overview of Industrial Internet of Things.

Automation & Robotics - Partnerships

Machine Learning & Data Science – IMR

Method: Online learning Level: Introduction Cost: €567 +VAT Duration: 1 Day

View course overview

In this series of presentations, Dr Brian O'Halloran - a highly experienced data scientist - provides a broad and unbiased overview of the machine learning landscape, from the introductory building blocks to more state-of-the-art approaches, with an overall lean towards uses in the manufacturing domain.

Additive Manufacturing

Best Practice in Powder Characterisation – Online & Live

Method: Online & Live Level: Introduction Cost: £600.00 +VAT Duration: 2 Days

View course overview

This course will provide you with the necessary skills and knowledge to be able to identify and apply best practice powder characterisation methods and establish if a powder meets a desired standard.

Additive Manufacturing

The Powder Management bundle

Level: Introduction Cost: £327.98 +VAT

View course overview

Start your journey to becoming a Powder Management expert today

Additive Manufacturing

Design for Additive Manufacturing bundle

Level: Introduction Cost: £579.98 +VAT

View course overview

Start your journey to becoming a Design for Additive Manufacturing expert today!

Additive Manufacturing

Advanced Introduction to Additive Manufacturing – Online & Live

Method: Online & Live Level: Introduction Cost: £300 +VAT Duration: 1 Day

View course overview

Delivered online by our expert engineering team at the home of the National Centre for Additive Manufacturing (NCAM), this virtual classroom course will provide you with knowledge of the associated principles, processes, materials and design approaches of additive manufacturing.

Additive Manufacturing

Design for Metal Powder Bed Fusion – Online & Live

Method: Online & Live Level: Introduction Cost: £600 +VAT Duration: 2 Days

View course overview

This interactive online course will provide you with the necessary skills and knowledge to be able to exploit the design freedom of Additive Manufacturing and take a design from conception through to AM processing.

Additive Manufacturing

Implementing Powder Management – Online & Live

Method: Online & Live Level: Introduction Cost: £300 +VAT Duration: 1 Day

View course overview

Delivered by our expert materials quality engineering team, this online course will provide you with the tools to develop a comprehensive powder management framework you can apply to your organisation.

Laser Processing

Laser Processing – Online & Live

Method: Online & Live Level: Introduction Cost: £300 +VAT Duration: 1 Day

View course overview

Delivered online by our expert engineering team here at the MTC, this course will introduce you to laser processing technologies, their capabilities, limitations and what applications are currently available.

Additive Manufacturing

Foundation Certificate in Additive Manufacturing

Level: Introduction Cost: £319.20 +VAT

View course overview

Start your journey to becoming an Additive Manufacturing expert today

Take MTC Training’s first fully online certificate in partnership with the National Centre for Additive Manufacturing (NCAM).

Designed as an introduction to additive manufacturing by experts from the national centre, you’ll get to grips with this disruptive technology and receive an NCAM endorsed certificate.

Laser Processing

Laser Processing

Method: Face to Face Level: Introduction Cost: £900 +VAT Duration: 2 Days

View course overview

The overall aim of this course is to increase the awareness, amongst potential users, of laser materials processing technology, its capabilities, applications and limitations. The course will be a mixture of classroom lectures and hands-on practical experience using industrial laser systems.

Additive Manufacturing

Reverse Engineering Parts by Additive Manufacturing

Method: Face to Face Level: Intermediate Cost: £450 +VAT Duration: 1 Day

View course overview

This course will enable you to design an appropriate process to reverse engineer a selected part so that it can be made using AM.

Additive Manufacturing

Design for Polymer Powder Bed Fusion

Method: Face to Face Level: Intermediate Cost: £1000 +VAT Duration: 2 Days

View course overview

This hands-on practical course will provide you with the necessary skills and knowledge to be able to exploit the design freedom of polymer Additive Manufacturing and take a design from conception through to AM processing.

Additive Manufacturing

Essential Requirements Capture for Additive Manufacturing

Method: Online learning Level: Introduction Cost: £25 +VAT Duration: 0.5 Hour

View course overview

This online course will provide engineers with a clear process to ensure that they capture all requirements for a particular AM part or assembly such that it can be designed and made to match the client’s needs.

Essential Requirements Capture for AM

Add to cart

Additive Manufacturing

Best Practice in Powder Handling

Method: Face to Face Level: Introduction Cost: £900 +VAT Duration: 2 Days

View course overview

This 2 day face to face course will provide you with the necessary skills and knowledge to be able to safely handle and process AM powders, mainly metals, but also polymers, and will demonstrate the various stages involved from initial receipt through to disposal.

Additive Manufacturing

Design for Metal Powder Bed Fusion

Method: Online learning Level: Advanced Cost: £399.00 +VAT Duration: 8 Hours

View course overview

Using a mix of interactive videos featuring experts from within the Design for Additive Manufacture team from the National Centre for Additive Manufacturing (NCAM), online discussions, software simulations and self-paced activities, this online course will provide you with the necessary skills and knowledge that you need to be able to exploit the design freedom of additive manufacturing. It will take you through the stages needed, from conception to the design of a component using best practice methods and appropriate software, to ensure that your component is optimised for function and manufacturing via metal powder bed fusion additive methods.

Additive Manufacturing

Best Practice in Powder Management

Method: Face to Face Level: Intermediate Cost: £450 +VAT Duration: 1 Day

View course overview

Delivered by our expert Materials Quality engineering team, this face-to-face course will provide you with a comprehensive powder management framework you can apply to your organisation.

Additive Manufacturing

Design Rules for Electron Beam Powder Bed Fusion

Method: Online learning Level: Advanced Cost: £49.99 +VAT Duration: 1 Hour

View course overview

Upon completion of this course you will be able to prepare a model fit for submission to a bureau to be manufactured using Electron Beam Powder Bed Fusion.

Design Rules for Electron Beam Powder Bed Fusion

Add to cart

Additive Manufacturing

Developing the Business Case for Additive Manufacturing Adoption

Method: Online learning Level: Intermediate Cost: £399 +VAT Duration: 8 Hours

View course overview

This course will enable you to develop a business case for using AM for a selected application. You will gain skills in using a process-based approach to: define the costs for each production step; consider the opportunities and benefits of AM for the selected component; and develop a recommendation based on a quantified value of AM to the business and end user.

Business Improvement

Design for Manufacture & Assembly for Construction

Method: Online learning Level: Introduction Cost: Free Duration: 1 Hour

View course overview

Delivered by our experts, this course aims to help you understand the unique opportunities available to you through Design for Manufacture and Assembly (DfMA) as well as considering the benefits and challenges which come with introducing DfMA into your business.

Design for Manufacture & Assembly for Construction

Add to cart

Additive Manufacturing

Advanced Introduction to Additive Manufacturing

Method: Face to Face Level: Intermediate Cost: £500 +VAT Duration: 1 Day

View course overview

Delivered at the home of the National Centre for Additive Manufacturing (NCAM) by our expert engineering team, this 1 day face-to-face course will provide you with the knowledge of the associated principles, processes, materials and design approaches for Industrial 3D printing.

Additive Manufacturing

Best Practice in Process Selection

Method: Face to Face Level: Intermediate Cost: £450 +VAT Duration: 1 Day

View course overview

During this one day course you will compare the 7 ASTM defined processes in Additive Manufacturing, along with their sub-processes. You will work through realistic case studies, applying part selection and down selection principles and gradually put together a case for its technical, commercial and overall feasibility using a given technology. You will then apply this methodology to select an appropriate manufacturing unit.

Additive Manufacturing

Practical Insight into Directed Energy Deposition

Method: Face to Face Level: Intermediate Cost: £1350 +VAT Duration: 3 Days

View course overview

Delivered by the expert engineers from the National Centre for Additive Manufacturing. This course will give participants practical experience of the end-to-end processes needed for Industrial Directed Energy Deposition; including design, materials, technology, production and post-processing.

Additive Manufacturing

A Guide to Additive Manufacturing for Engineers Part 1

Method: Online learning Level: Introduction Cost: £25 +VAT Duration: 0.5 Hours

View course overview

This highly interactive online learning course will provide you with insight into each of the seven Additive Manufacturing (AM) processes and their associated materials. The course will help you make an informed decision about whether Industrial 3D printing can be adopted by your business.

AM: A Guide for Decision-Makers Part 1

Add to cart

Additive Manufacturing

A Guide to Additive Manufacturing for Engineers Part 2

Method: Online learning Level: Intermediate Cost: £99.98 +VAT Duration: 2 Hours

View course overview

The second part of this interactive online course will provide further insight into Additive Manufacturing (AM), focusing on the seven AM processes and their associated materials. This final part of the training will help you decide whether to adopt Industrial 3D printing into your manufacturing processes.

AM: A Guide for Decision-Makers Part 2

Add to cart

Additive Manufacturing

Best Practice in Process Selection

Method: Online learning Level: Intermediate Cost: £49.99 +VAT Duration: 1 Hour

View course overview

On this compact four-module course you will learn how to select the most appropriate technology for your requirements. Includes our unique two-stage process selection tool which helps narrow down the available processes on a total of 18 criteria. Our methodology can also be used to select the most appropriate machine in a given technology.

Best Practice in Process Selection

Add to cart

Additive Manufacturing

Design Rules for Laser Powder Bed Fusion

Method: Online learning Level: Advanced Cost: £49.99 +VAT Duration: 1 Hour

View course overview

Upon completion of this course you will be able to prepare a model fit for submission to a bureau to be manufactured using Laser Powder Bed Fusion.

Design Rules for Laser Powder Bed Fusion

Add to cart

Additive Manufacturing

Bespoke Training in Additive Manufacturing

Level: Introduction Cost: £POA +VAT

View course overview

Additive Manufacturing

Design for Metal Powder Bed Fusion

Method: Face to Face Level: Advanced Cost: £1500 +VAT Duration: 3 Days

View course overview

This 3 day face-to-face course, delivered at the home of the National Centre for Additive Manufacturing (NCAM) by our expert engineering team, will provide you with all the necessary skills and knowledge to be able to exploit the design freedom that Industrial 3D printing offers. Learn how to take a design from conception through to processing including material selection.

Additive Manufacturing

Practical Insight into Metal Powder Bed Fusion

Method: Face to Face Level: Intermediate Cost: £2000 +VAT Duration: 4 Days

View course overview

This 4 day face-to-face course is delivered by the expert engineering team from the National Centre for Additive Manufacturing (NCAM). You will get practical experience of the end-to-end processes needed for Industrial 3D printing, including design, production and post-processing required for Metal Powder Bed Fusion

Additive Manufacturing

Health, Safety, Risks and Mitigation

Method: Online learning Level: Introduction Cost: £99.98 +VAT Duration: 2 Hours

View course overview

This interactive online course will provide you with the necessary skills and knowledge to apply Health and Safety (H&S) best practice guidelines when using loose powders, equipment, materials and post processing. You will learn to recognise unsafe practices, the risks, and how to apply appropriate mitigation techniques.

Additive Manufacturing Health, Safety, Risks and Mitigation

Add to cart

Automation & Robotics

Introduction to Robot Programming

Method: Face to Face Level: Intermediate Cost: £2250 +VAT Duration: 5 Days

View course overview

This practical 5 day face to face course will give you the key skills to work with a 6 axis industrial robot cell. Starting with basic programming, moving onto troubleshooting and recovery techniques, our experts will teach you all you need to know to work effectively with a robot.

Automation & Robotics

Implementing Automation & Robotics

Method: Online learning Level: Intermediate Cost: £25 +VAT Duration: 1 Hour

View course overview

Developed by the MTC’s Robotics & Automation experts, this online learning course will provide you with the skills and knowledge to help you make informed decisions about the introduction of automation and robotics to your business.

Implementing Automation & Robotics

Add to cart

Digitalisation

Introduction to Digital Manufacturing

Method: Online learning Level: Introduction Cost: £24.99 +VAT Duration: 0.5 Hours

View course overview

This course has been developed by the MTC’s Digital Manufacturing experts to help you make informed decisions on the implementation of digital tools into your manufacturing processes.

Introduction to Digital Manufacturing

Add to cart

Additive Manufacturing

A Guide to Design for Metal Powder Bed Fusion

Method: Online learning Level: Intermediate Cost: £149.97 +VAT Duration: 3 Hours

View course overview

Delivered by experts from the home of the National Centre for Additive Manufacturing (NCAM) the aim of this course is to help you appreciate and contextualise the unique design opportunities opened up by Industrial 3D Printing, as well as considering the challenges which come when designing for this rapidly evolving technology.

Design for Additive Manufacturing (Online Learning)

Add to cart